BOSS Oil Water Separator
All Units
| Specifications | Value |
|---|---|
| IMO MEPC Compliance | 107 (49) |
| Test PSIG | 45 |
| Operating Pressure | 15 PSIG |
| Operating Temperature Range | 5-60 degC |
| Max Free Oil Concentration | 35% |
| Max Fluid "C" Oil Concentration (with filter) | 6% |
| Oil in Water Discharge with TPH | <15 ppm |
| Single Phase Power Options | 110/120/220 vac |
| Three Phase Power Options | 210/220 vac 380/415 vac 460/480 vac 575/600 vac |
| DC Power Options | 12 or 24 V |
| Frequency | 50 or 60 Hz |
| Max Amperage | < 15 amps |
| Max Turbidity for Accurate TPH Reading | 35 NTU |
| Design Negative Inlet Head (Ft/M) | 9(2.8) |
| Positive Inlet Head Design Pressure (Motorized Valve Required) | 15 PSIG |
| Level Sensor | Conductance |
| Pump | Centrifugal with SS Housing |
| Coalescing Media | Polypropylene / HDPE |
| Hazardous Area Classification | Nema 4X or Class I Div II |
| Coating Specification | Epoxy / Urethane |
| Piping and Manual Valves | Bronze / Red Brass |
| Vessel Metallurgy | Marine Coated Carbon Steel |
BOSS Oil Water Separators, Resolution MEPC.107(49) - Specification Sheet
| Specifications | 2 GPM | 5 GPM | 10 GPM | 25 GPM | 45 GPM |
|---|---|---|---|---|---|
| Height (inch/cm) | 48(122) | 56(142) | 72(183) | 74(188) | 80(203) |
| Width (inch/cm) | 26(66) | 28(71) | 36(91) | 40(102) | 54(137) |
| Depth (inch/cm) | 42(107) | 46(117) | 60(152) | 78(198) | 96(244) |
| Dry Weight (lbs./kilogram) | 700(318) | 850(386) | 1500(680) | 2500(1135) | 4000(1816) |
| Capacity USGPM (m3/hr) | 2(0.45) | 5(1.13) | 10(2.27) | 25(5.68) | 45(10.22) |
| Activated Carbon Media Charge (lbs./kg) | 60(27) | 110(50) | 250(114) | 500(227) | 1000(454) |
| Organoclay / Sand Charge (lbs./kg) | 92(42) | 185(84) | 365(166) | 730(331) | 1500(662) |
| Pipe Connections In/Out | ¾" - ¾" | 1" - ¾" | 1½" - 1" | 1½" - 1½" | 2" - 1½" |